Imagine this: standing at the top of a hill, maybe high above the treetops, overlooking lovely views below. You’re harnessed helmeted, and strapped to a cord that is hundreds of feet. You take a leap and soar down the line—the wind speeds in your feet as well as your face touch just atmosphere.

This is what it’s like to zip line, plus it may be the closest it is possible to get to flying. It’s no wonder the action increasing in popularity throughout the world, with lines discovered at upscale resorts and many experience camps and as an element of high ropes courses and canopy tours. These professional zip lines include a cable strung at an incline.

A trolley rides along the cable, to which the rider’s harness is attached by carabineer. The trolley may also consist of a seat or handlebar for the rider to hold on to.

A ride of those speeds and heights can be intimidating for children or grownups that are mindful while soaring on one of these professional lines could be the thrill of a lifetime. It’s also not nearly as cost-effective or suitable as having one installed in your own backyard.

Private zip lines provide a ride that is still exciting, although less steep and shorter —with the extra plus of being available to ride as frequently as you’d like! Below are some choices of directions on the best way to begin on assembling your own zip line.*, in addition to easy to install zip line kits

Before you Buy a Zipline Kit, Organize Your Space

Unless you’re organizing to cut them down there should be no tall trees or obstructions directly in between them. Also remove and shrubbery that can reach or scratch on the rider. Be sure the area is not overly narrow to glide through whether there are some trees to the right or left side of the trail.

A zip line just works if it truly is strung on an incline, because gravitation is the thing that creates speed and pulls along the trolley. Ideally, your two anchors will likely be located on top and base of a hill.

If you have a bottom end of the line in mind (such as a platform or the earth) you need to work from there and fix the starting point of the line to locate a suitable starting height to coincide.

Your zip line should be fully planned out before you purchase a kit or any materials, and it might help draw a diagram: there are a couple of blog examples of the best way to design a method over at Build a Zipline and Zip Line Stop.

If your zip line is going on a steep incline, you will need to include a braking system (which we’ll go more indepth into later). This braking system will attach to a third anchor close to the end of the line by bungee, that’ll help slow the trolley to a stop. It’s perfect install a hardy post near the end of your line or to have a tree that is third, determined by the length of time the braking bungee is.

Will Your Zipline be Long-Term?

There are cons and pros to wrapping the cord around the anchor in addition to permanently attaching your zip line. It depends on whether you presume you will want to correct the line’s place in the foreseeable future. The line will probably be bolted to eye hooks that are drilled through the tree, in the event you are forever installing the line.

Any adjustments to height that you simply select to make will require drilling another hole, which might damage the tree. A non-permanent setup calls for wrapping the cord across the tree. You shouldn’t wrap the cord directly round the tree, as this can compel the tree to grow the cable throughout and become misshapen. Wrap the cord around blocks, towels, or a garden hose as a barrier between the trunk and the cord.

zip line kits, backyard zip line

Zip Line Anchors

There are several acceptable methods for ending a zip-line cable with products various brackets, and wire rope fittings. Be sure that you simply consistently follow manufacturer’s directions for several equipment programs. Then get contractor or an engineer to guide you, if you are connecting to a building or alternative structure. In the event that you are linking the zip line to a sapling or pole, then please read on.
Winding VERSUS Through-Bolting
Whether to through -secure or wrap the cord around the tree is an issue debated by zip line contractors that are experienced, thus don’t expect a straightforward answer for all scenarios. Then through bolting is typically the preferable method as it is a cleaner appearance along with the post isn’t living if you are employing a pole. That is where the debate comes in, in case you are joining a tree and the zip-line. Some advocate while others insist on wrapping cord round the shrub, bolting through the tree. There are pros & cons to each cable conclusion approach:
Why to bolt zip-lines to trees:
You don’t need to wrap cables around trees, which can girdle them.
The blocks used to distribute the transmission lines away from the trees cause plenty of growing interference.
Repetitive Back-up Loops are often added that don’t girdle the trees.
Why to wrap zip-line cords around trees:
It is possible to observe every area of the device to scrutinize
You don’t need to drill in to the tree, causing harm
Alterations that are producing doesn’t require drilling a fresh hole.
Bolting to Poles
Products ought to be kept at least a foot from the very top of the post and joined with appropriate hardware. The following zip-line products are commonly used on Class 2 posts on obstacle classes for cable conclusions. Always check the evaluations to ensure why these parts will work for your own zip-line.
3/4″ Forged Fanatic Vision Bolt
5/8″ Forged Thimble Eye Bolt
Wire Rope Fittings
The particular fittings to the cable drop into three classes:
U Bolts – since they reduce cable strength all these are no longer commonly used.
Fist Handle Clamps – they nevertheless decrease the cable power by 20%, although these are better since they do not deform the cord as readily
Ferrules – just and specialists prefer these decrease the cord strength by 5%.
Last notice on accessories – make certain to follow along with the recommendations of the manufacturer’s. Down-load the features that are crosby for the size cable that is specific you might be employing. For most backyard ziplines, you are going to want 2 ferrules or 3 clamps, however don’t presume, check the info for present reccommendations and maintain zip-line safety ranked Number 1.

Zip Line 101

Zip Line style 101
build a backyard zip line

The first style step is obtaining a basic clue concerning the parameters of the nothing line ride. Here are the basic queriesyou have got to answer before starting:

How long is the zip line?
What are you attaching everyfinish to?
Does your style have a affordable pitch?
Roughly how high area unit the begin and end points?
How long is the zip line?
Measure the distance on the bottom between the beginning and end. add some zip line cable to allow for sag (about third or so), cable terminations per your design (at least a pair of feet on every aspect, more if wrapping around a tree), and a little a lot ofto form the installation easier (enough to achieve from the attachment purpose to the ground). Aircraft cable is comparatively low-cost, so build certain you have got masses.

What are you attaching everyfinish to?
Zip lines area unit most ordinarilyhooked up to trees or poles. Depending on the planning, most poles and some small or questionable trees canwould like guy wires to counter the strain forces placed by the load of the cable and therefore the rider that pulls powerfully inward thanks to the vector forces concerned. Some home zip lines have been hooked up to tree homes, ground houses, playsets, rock outcrops, or steel towers. If you are planninga zipper line and you do notrecognize if your attachment methodologyis robust enough, you should get the opinion of skilled|a certified} professional likeAssociate in Nursingspecializer, engineer, or carpenter.

Does your style have a affordable grade?
You can’t nothing line on a flat or uphill pitch and expect to achievethe tip of the ride thanks to friction and gravity. Neither can you zip down a steep cliff and expect to stop right at the bottom. Suicide Home Zip LineYour design must take into account the pitch between the starting attachment and the ending attachment. Ideally, this will be on a slightly downhill pitch. This all changes starting with longer zip lines over 250′ or so (the longer the zip line, the greater the tolerable pitch). If you are going down a cliff or off a high point to a low point (i.e. treehouse to ground), then just make sure that the line is long enough for friction to slow the rider and/or that the tree at the bottom is tall enough to raise your estimated attachment point if necessary to reduce the pitch. Don’t worry about the precise math at this point because you can make adjustments to the design while building, but make sure you are in the ballpark.

Roughly how high area unit the begin and end points?
200 foot zip lines
The cable should not be put in taut. This makes the tension way too high once weight is applied within the center. Professional zip line builders can usually build in regarding five-hitter sag as a rule of thumb – the share changes with every zip line design! The cable size, length of run, and maximum rider weight all have an effect on the minimum needed sag. So to use the rule of thumb on associate degree unrealistically easy style, a 200′ zip line that is 7′ high within the middle (when loaded with a rider), should sag five-hitter or ten feet. Zip Line style This means that that the tip attachments area unit 17′ high every. At this point, plan that the longer the nada line, the higher within the air you’ll have to be to begin. Make certain that you simply have how to induce that prime within the air so as to ride. Furthermore, make certain that you simply area unit comfy with ascent up thereto height and being that prime higher than the bottom. Designing & building a zip line at your home will place you et al. in danger of a fall.

Sometimes a beginning purpose is thought, and in these cases, the ending attachment is the plug factor throughout trial and error check runs (always check 1st with a weight just in case your guess is simply too quick a ride to control). zip line kits

Which Zip Line Cable Length is Right for You?

Zip Line Stop offers several different zip line cables that come in set lengths- 75 foot, 100 foot, 150 foot, and 200 foot zip line cable. The hardest part about deciding to put up a backyard zip line is deciding how long it will be. If you have younger kids around 3 or 4 you will mostly likely want to go with a shorter cable size such as the 75 foot cable. For older kids around 5 or 6, the 100 foot zip line would be mostly appropriate and once your kids are around 7 and up you can choose between the 150 foot to 200 foot cable. Don’t get me wrong, an 8 year old would definitely still enjoy a 75 foot zip line in their backyard but it just won’t be as long as ride.

Zip Line Stop also sells just zip line cable. The cable comes in varying thickness depending on the weight of the load and the length of the ride. It comes in 3/16″, 1/4″, 1/2″, 5/16″, and 3/8″ cable. The zip lines sold  on the website come as follows: The 75 foot and 100 foot zip lines come with 3/16″ cable and the 150 foot and 200 foot zip lines come with the 1/4″ cable. The increase in cable size is due to the increased length and tension put on the zip line during the ride.

I’ve seen a multitude of parents who have chosen the 75 foot zip lines to attach them to their children’s tree houses. This is such a fantastic idea! One father decided to set the zip line up to his son’s tree house as a birthday surprise and it was a huge success, not only with his son but for the entire party! Zip Lines catch attention, they are like magnets for kids because it is something that kids crave. They love the idea of being able to freely operate something that moves so quickly and provides such a rush that is in their BACKYARD.

A Backyard Tree House Zip Line

One couple who lived in Virginia purchased the 200 foot zip line for with an amazing plan in mind. They assembled the zip line to zoom over top of their lake in their backyard! The lake was about 150 feet across and it was designed in such a way that it looked like rider was going to dive right into the bottom of the lake, but instead it they just skimmed the waters surface. They originally installed if for their 14 year old son that was constantly rigging up rope swings with his friends to jump into the lake, but they had a concern over the safety of the platforms that they were building. Again, a summer birthday surprise- he got a zip line…that flies over a lake! Lucky kid.

Zip Lining Across a Lake in Virginia

As you’ve read the hardest thing to consider when you want to buy a backyard zip line is what the purpose will be. There is no doubt that it will be an amazing and thrilling experience, but how do you want to utilize it? Do you want to build a platform and zip down from an incline? Do you already have a sloping hill in your backyard that would be the dream spot for a zip line? Or do you want to be super adventurous like the couple in Virginia and design the perfect zip line over a lake? The possibilities are endless!

Zip Lining Across a Lake!


Spring Stop Braking Method

So what gives with all of these zip line braking methods? There are so many to choose from so how do you make the right choice? Most kits bought online, for example at Zip Line Stop will come with a primary braking system which is a brake block…but what if that fails? When you buy a zip line kit for your home you should always have a secondary braking system for obvious safety reasons. My favorite is the ZLP Spring Stop, it is essentially a stretched out spring that slides onto the zip line cable at the end of the ride. The only downfall is that if you have already installed your zip line you will have to take it down to put the spring stop into place. Although this is an inconvenience, I’ll tell you it’s worth it- especially if you’ll have roughhousing teenagers riding on the zip line… Trust me, you’ll thank me later for putting on the second braking system!

The spring stop also comes in two colors, neon green and black depending on your preferences. The green is cool because if you buy it in conjunction with the Alien Flier zip line kits it will match the color scheme. Now to make this clear, you most likely wouldn’t need a secondary braking system if you only have, say, a 75 foot zip line, but if you have 200 foot zip line I would definitely recommend going with the second system…even if it is a second brake block..just in case. But hey, I mean some people live on the edge, right?

The Best 200 Foot Zip Line Kit for Your Backyard

One of the best 200 Foot Zip Line Kits is the R200 by Alien Flier. It has everything you need to set up a backyard zip line in under a half an hour. It is the most comfortable of the styles because it is a zip line with seat. It comes with the X2 Trolley which is the only zipline trolley on the market with a speed control trigger. This is great for kids and newbies because it allows the rider to adjust their speed as they ascend down the ride. It also comes with 200 feet of galvanized 1/4″ zip line cable with 6 feet of slack on either end to secure your anchors. It comes with a heavy duty zipline brake block deceleration system that will bring the rider to a slow and easy stop, a tow rope to bring the the trolley back to the starting position, and all of the necessary hardware needed for assembly. This zip line is also great for kids because it has many adjustable seating options: the disc seat, a harness, and also a swing seat. All of them are made with safety in mind and are super durable. In my next blog post I’ll explore other zip line makes and styles. Check out Zip Line Stop for more zip line information!